ProMeth PM115 Water Methanol injection Pump (30 GPH/1890CC PER MINUTE @ 190 PSI)

Features Include:
Pressure adjustable from 100-300 PSI
3/8 NPT female inlet & outlet port
Motor turns 1750 RPM @ 12 volts  
13.5 amperage draw 
Built-in bypass valve
Built-in thermal protection
Built-in anti reverse check valve 
Built-in heat sink on back of motor
Heavy duty dual EPDM pump seals   
Pressure adjustable from 100-300 PSI
Can run dry up to 1 hour without damage
100% methanol compatible
Tested prior to shipping 
Made in the USA
Weight 5.2 lbs
Flow & Horsepower Ratings @ 13.5 Volts:
1.4 gallons per minute open flow
115 liters per hour @ 190 PSI
30 gallons per hour @ 190 PSI
1890 cubic centimeters @ 190 PSI
Supports up to 1700-2200 horsepower - 100% water mix 
Supports up to 1000-1300 horsepower - 50/50 water methanol mix
Supports up to 800-1100 horsepower - 100% methanol mix
Special Notes:
Do not use with petroleum products (E85, E98, gasoline, diesel, etc) 
Use 12 gauge wire for power and ground
Does not include pump fittings. Pump fittings are available for sale separately
Pumps come preset at 220 PSI - Expect 4-5 years of service if pump pressure is left at 220 PSI or below
Running the pump over 250 PSI is not advised and will shorten pumps life
All tests were performed using a 6AN stainless steel braided hose on the inlet side of pump
Using 1/4" outside diameter nylon on the inlet side of the pump will reduce pump performance and flow output
Pump may be mounted vertical or horizontal